If the name on your grill hood is Vintage, you have a built-in made by Vintage Products and sold as Vintage Luxury Grills. These are stainless grills with a flush infrared rotisserie burner, and they tend to be bought for outdoor kitchens that get used regularly. When one stops lighting or starts cooking unevenly, we come to the house and work on it in the island.
About Vintage grills
Vintage Products has been operating since 2001, selling under the Vintage Luxury Grills name. The VBQ models come in 30, 36, 42 and 56 inch widths, with built-in and cart versions. The VBQ30G has two stainless steel 18SR burners. The 36 and 42 inch grills have three, and the 56 inch model has three plus a ceramic infrared Sear Zone. The Sear Zone versions carry an SZ in the model number, such as the VBQ36SZG and VBQ42SZG. Each grill has a flush-mounted infrared rotisserie burner, and halogen lighting is built into the grill.
The failures we see most
On a grill with this setup, a few components carry most of the wear. The rear infrared rotisserie burner sits in a hot, greasy spot, and its ceramic face can crack or glaze. The main burners are stainless, but ports still clog and welds can crack. The halogen bulbs run hot and burn out. And the single spark ignition can get hard to light if the electrode is dirty, aimed wrong or worn. A listing for the 36 inch model notes it may take a few tries to click, and we agree that repeated clicking with no flame is a sign something needs attention.
- No spark or weak spark at the electrode.
- Infrared burner that does not light, lights in patches, or pops.
- Halogen lights that are out or flickering.
- Uneven heat across the grid from blocked burner ports.
- Rotisserie motor that stalls or does not turn.
On-site repair
We start with the grill lit, if it will light. Watching the main burners, the infrared burner and the lights, we learn whether the problem is fuel, spark, or the part itself. Then we trace it: regulator, valve, burner, electrode and wiring. Parts that are worn out are changed, the rest stays as it is, and the grill is tested again closed up with every burner running. Our BBQ repair page has more on how visits work.
Cleaning a Vintage built-in
A proper cleaning means removing the grates, taking out the burners, scraping the firebox and degreasing the drip path and tray. The infrared burner gets particular attention, since grease baked onto its face affects how it lights. Stainless is wiped with the grain and polished to bring back an even finish. See BBQ cleaning for the full list.
Restoration
When parts are worn through, not just dirty, the answer is restoration: new burners, a rebuilt ignition, a new infrared burner, fresh lights and refinished stainless where it has dulled or stained. Cleaning improves how the grill looks and burns. Restoration returns it to working order across the board. Our restoration work and the gallery show what the results look like.
Built-in or cart
Most Vintage grills we service are in built-in islands, so we plan around the cooking opening and the access doors. Cart models are easier to get at, but the same components wear in the same way. Because the Sear Zone and smoker-equipped versions have extra burners, they have extra parts to check.
Keeping a Vintage in shape
Wipe grease from around the rotisserie burner when it is cool, empty the drip tray often, and keep the cover on between cooks. Run the rotisserie motor now and then so it does not sit idle for months. If the flame turns yellow or the igniter needs repeated tries, have the grill looked at before it gets worse.
Where we go
We work throughout Orange County: Anaheim, Orange, Garden Grove, Costa Mesa, Tustin, Irvine, Aliso Viejo and Mission Viejo among others. If you would like an instant quote started, or have an island build in mind, our outdoor kitchen page is also there.