Lion Premium Grills are built to look like commercial equipment, and a good number of them are installed in Orange County outdoor kitchens. They are heavy stainless grills with big knobs and a lit hood, and like any grill they wear in predictable ways. We repair, clean and restore Lion grills at the customer’s home, so the grill stays where it is installed.
About Lion Premium Grills
The Lion name belongs to a premium line created by barbecue designer Leon Carter, who is credited with building the first barbecue island cabinet and equipment in one factory and assembling it as a single unit in 1992. About two decades later he set out to make a luxury grill line, which became Lion. What we can tell you comes from the grills themselves and from how they are described by sellers.
The three collections
Lion sells its gas grills as the L60000, L75000 and L90000 collections, each offered in built-in and freestanding versions depending on the model. The L60000 uses four main burners. The L75000 adds a 15,000 BTU infrared rear burner for the rotisserie, and the L90000 has five main burners plus that rear burner. The bodies are described as 16-gauge 304 stainless steel, the burners are cast stainless steel, ignition is advertised as a flame-thrower style system, and there are two interior hood lights. The grill head has a front control panel, large commercial-style knobs and a centered temperature gauge.
Typical problems we see on Lions
Cast stainless burners hold up well, but the parts around them are what we usually end up working on.
- Ignition that is slow or inconsistent, especially on the farthest burners, caused by weak modules, loose wires or dirty electrodes.
- Rear infrared burners that are hard to light, light unevenly, or have a clogged or cracked ceramic face from grease and rotisserie use.
- Rotisserie motors that stall or won’t turn under load, or a missing or loose spit rod fitting.
- Interior lights that flicker or go out, since the hood lights live in heat and moisture.
- Heat plates that warp or corrode and let grease reach the burners.
- Discolored or stained stainless, mostly around the burners and control panel.
How a repair visit works
We light the grill first and check every burner, the rear burner and the rotisserie if it has one. Then we trace the problem: gas supply and regulator, valves, electrodes, modules and wiring. Parts that have failed are replaced, the grill is put back together, and we test it lit, burner by burner, until the flame and the spark are right. Our BBQ repair page explains what the work covers.
What a cleaning includes
With a Lion, a thorough clean starts by removing the grates, heat plates and burners. The firebox and hood get degreased, the burner ports are cleared, the drip path is emptied and scrubbed, and the lights and knobs are wiped down. The stainless is then polished with the grain so the finish is even. You will find more about this on our cleaning page.
Restoration for a worn Lion
A grill that lights poorly, has rusted heat plates and a dull body needs more than a cleaning. Restoration brings it back with fresh heat plates, igniters and wiring where needed, a rebuilt rotisserie setup, working lights and refinished stainless. We show finished grills in the gallery, and you can read how restoration differs from cleaning on the restoration page.
Built-in and freestanding Lions
Most Lions we are called to are built-in heads in an island, where the sides are boxed in. We service those from above and the front, and keep the surrounding countertop and tile protected. Freestanding Lions are easier to get around. Either way, the rear infrared burner and rotisserie bracket need a careful look, since those parts catch grease. Many of these grills sit in larger outdoor kitchens, and we can look at the rest of the setup while there.
Care tips
Run the grill hot for a few minutes after cooking, clear drippings regularly, and clean the infrared burner before it clogs. Wipe stainless with the grain, and cover the grill when it is not in use. Little habits like these keep the burners, igniters and lights working longer between service visits, and they make each cleaning faster and more thorough when it does come due.
Service area
We work across Orange County, including Anaheim, Santa Ana, Garden Grove, Tustin, Lake Forest, Brea, Yorba Linda, Mission Viejo and Costa Mesa. Get started with the instant quote form.