Dacor BBQ Repair in Orange County | BBQ Restorations

Orange County

Dacor BBQ Repair in Orange County

Dacor is better known for ranges and wall ovens than for outdoor cooking, so a Dacor grill in an Orange County backyard tends to be a built-in that went in alongside a Dacor kitchen or a custom island. We come to the house, work on the grill where it sits, and fire it up before we leave. This page covers what is worth knowing about the brand and how we handle repair, cleaning and restoration on these grills.

Where Dacor comes from

Dacor traces back to 1948, when Stanley Joseph’s Stanthony Corporation began making kitchen ventilation hoods. The company took the Distinctive Appliances name, shortened to Dacor, in 1965, and it stayed in the Joseph family for three generations. For years its factory was in the City of Industry in Southern California. Samsung Electronics America bought the company in 2016, and Dacor is now a Samsung subsidiary headquartered in New Jersey.

Outdoor cooking is a smaller part of the catalog. The Discovery built-in grill, sold in 36-inch and 52-inch widths, is the one most homeowners run into. It is stainless with chrome trim and Dacor’s Epicure styling, and it runs on natural gas or propane. Its main burners are U-shaped tubes made of stainless alloy with titanium, and it adds a ceramic infrared burner for searing, plus a temperature gauge in the hood. We are not going to guess at details of models we have not seen on a job, so if yours differs from that description, we look at what is actually in the cabinet.

Problems we see on Dacor grills

Because the Discovery layout is tube burners plus one ceramic infrared burner, the failures follow a pattern:

  • Tube burners that have rusted through, warped, or developed clogged ports, which shows up as yellow flame, uneven heat or a burner that will not stay lit.
  • Spark electrodes fouled with grease or worn out, so the igniter clicks but the burner never catches.
  • The ceramic infrared burner cracking or glazing over with burned-on drippings, which cuts its heat and can make it light with a pop.
  • Gas valves that have gone stiff or leak at the stem after years of heat cycling.
  • Regulator problems, which usually appear as a grill that runs low on high or will not hold temperature.
  • Stainless that is staining, tea-colored or pitting around the burner box and the hood seams.

How we repair a Dacor on site

We start by watching the grill try to light, because the symptom tells us a lot. Then we pull the grates and heat plates, check gas flow at the regulator and valves, test each electrode and wire, and look at the burners themselves. Parts that are worn out get replaced with matching components, and anything that leaks gets sorted before the grill is used again. We finish with every burner lit and the flame checked across the full cooktop, including the infrared burner on its own.

Cleaning a Dacor grill

Cleaning is a teardown. Grates, heat plates and burners come out, the firebox is scraped and degreased, and the drip tray and grease path are cleared all the way to the catch cup so nothing is left to flare up. Burner ports are cleared, electrodes wiped, and the hood interior is cut back to bare metal. Stainless gets cleaned with the grain and polished so the Epicure look comes back instead of a smeared finish.

Restoring one that has been neglected

Cleaning makes a working grill clean. Restoration is for grills where parts are failing along with the dirt: new burners, new electrodes and wiring, fresh heat plates, a rebuilt infrared burner assembly where needed, and refinishing of stained or hazed stainless. If the grill lights and cooks evenly but is just filthy, you want cleaning. If it fights you every time, or the burner box is corroded, you are looking at restoration. You can see examples in our gallery, and the full scope is laid out on our BBQ restoration page.

Built-in Dacor grills and keeping them running

Nearly every Dacor grill we see is a built-in sitting in masonry or a prefabricated island. That affects the work: access is from the front and top, gas connections are behind the cabinet, and the grill cannot simply be rolled away. This is part of why on-site service makes sense. If your grill is part of a larger setup, see our outdoor kitchens page. A few habits help: brush the grates while warm, empty the grease cup regularly, run the burners on high for a few minutes after cooking to burn off residue, and use a fitted cover when it is not in use.

Service across Orange County

We work throughout the county, including Anaheim, Orange, Tustin, Placentia, Yorba Linda, Fullerton, Mission Viejo, Lake Forest and Huntington Beach. For general work see our BBQ repair and BBQ cleaning pages, or use the instant quote form to describe your Dacor.

Explore

More from BBQ Restorations

Orange County

Ready when you are

Send two photos and a few details, or call or text us.

Call / text Instant quote