Dynasty BBQ Repair in Orange County | BBQ Restorations

Orange County

Dynasty BBQ Repair in Orange County

A Dynasty grill is one of those built-ins you find in a lot of older Orange County backyards, set into a stone or stucco island and still doing the job years after the builder walked away. If yours has a burner that will not light, a row of flames that burns uneven, or an igniter that clicks and does nothing, we come to the house and work on it in place. Nothing gets hauled off to a shop.

Where the Dynasty name comes from

Dynasty was a brand name made by the Jade Corporation. Jade also built private-label grills that were sold under the Jenn-Air name, and Dynasty shares a founder with Alfresco Grills. The brand never carried the name recognition of some of its neighbors in the outdoor kitchen aisle, but the grills were built heavily and plenty of them are still in service. Model numbers you will see on the data plate typically begin with DBQ for the grills and DCT for the cart-style units, followed by a size and a letter or two. We cannot tell you where each one was assembled, and we are not going to guess, but we can tell you what we find when we open one up.

What tends to fail on a Dynasty

Igniters and burners are the two parts that most often give out on these grills, and that matches what we see in the field. A grill that has been around for a decade or more has gone through a lot of grease, heat and cover-off weather. The usual list looks like this:

  • Igniters that no longer spark, usually from a worn electrode, a cracked ceramic insulator or corroded wiring at the module.
  • Burners that have rusted through, clogged ports or cracks along the seam, which show up as yellow tips, popping on startup or dead zones across the grid.
  • Briquette trays that have collapsed or worn thin from years of drippings and heat.
  • Cooking grids that have lost their finish or bent.
  • Valves and knobs that have gone stiff or leak at the stem.

Fixing it where it sits

We start by lighting what still lights and watching the flame, because the flame tells you more than any manual. Then we pull the grids and trays, look at the burners from above and below, check the gas path from the regulator to the valve to the burner, and test the spark at the electrode. Only the parts that have failed get changed. When the work is done we light the grill, let it run up to temperature with the hood closed, and check every burner on low and high. If something is still off, we find out then, not after we leave.

Cleaning a Dynasty properly

A real cleaning on a built-in means taking it apart. Grids and briquette trays come out, the burners are lifted and brushed or soaked, the firebox and the grease path are scraped and degreased, and the drip pan is emptied and washed. Then the stainless is cleaned with the grain, rinsed and polished so it stops looking dull and streaky. Burner ports get cleared one at a time so the flame comes back even. If you are due for this and want to see the scope, our BBQ cleaning page lays it out.

Cleaning versus restoration

Cleaning gets a working grill back to a clean, safe, even-burning condition. Restoration is for a grill whose wear has gone past dirt: burners that are gone, trays that have collapsed, igniters that are dead, grids that are shot, panels that are pitted or discolored. We rebuild those pieces and refinish the stainless so the grill looks and cooks like it should. Our BBQ restoration work is where an older Dynasty usually ends up when several things are worn at once. You can look through finished work in the gallery to see what that looks like.

Built-in versus freestanding

Most Dynasty grills we see are built-ins, and that changes how we work. The grill is surrounded by masonry or a prefabricated frame, so we work from the front and top and keep the island and its doors, drawers and gas line undisturbed. Access matters, so we plan the teardown around what can come out through the cooking opening. If you have a cart model, it is easier to reach underneath, but the same parts fail for the same reasons. For anything built into an island, our outdoor kitchen service covers the surrounding pieces too.

Keeping it running

A few habits help an older grill last. Burn off the grids after each cook and brush them while warm. Empty the drip pan before it fills. Keep the cover on between uses so spiders do not build in the burner tubes, which is a real cause of flashback on older grills. Wipe the stainless with the grain and avoid chlorine cleaners. And if the flame starts to look lazy or yellow, have it looked at before a small burner problem turns into a bigger one.

Where we work

We cover all of Orange County, including Anaheim, Orange, Yorba Linda, Costa Mesa, Tustin, Mission Viejo, Lake Forest and Laguna Niguel. If your Dynasty needs hands-on BBQ repair, or you would like a quote request started online, those pages are the place to begin.

Explore

More from BBQ Restorations

Orange County

Ready when you are

Send two photos and a few details, or call or text us.

Call / text Instant quote